Bently Nevada 330103-00-22-50-12-00 3300 XL 8 mm Proximity Probe

Our company's advantageous brands

Foxboro/GE/Siemens/Moore/Emerson/Ovation/BentlyNevada/ABB/ICS/TRICONEX/Honeywell/

Westinghouse/Epro/Yokogawa/Allen-bradley/ Schneider /HIMA/Woodhead/Woodward

Overview of the Product

The 3300 XL 8 mm Proximity Transducer System provides an output voltage that is directly proportional to the distance between the probe tip and the observed conductive surface and can measure both static (position) and dynamic (vibration) values. The system’s primary applications are vibration and position measurements on fluid-film bearing machines, as well as Keyphasor reference and speed measurements. The 3300 XL 8 mm system delivers the most advanced performance in our eddy current proximity transducer systems.

Applicaiton

Steel Manufacturing Plants: Used on blast furnace fans, gas fans, and rolling mill gearboxes for shaft runout monitoring.

Hydropower Plants: Applied to turbine guide bearings and thrust bearings for shaft vibration measurement with strong sealing protection.

Coal-to-Liquid Gasification Plants: Used on air compressors, expanders, and syngas compressors for hidden vibration monitoring.

Natural Gas Transmission Plants: Installed on gas turbines and pipeline compressors for continuous shaft condition monitoring.

Large Fertilizer Plants: Used on ammonia and CO₂ compressors as key TSI monitoring components

Frequently Asked Questions

Q: Why is the 330103-00-22-50-12-00 proximity sensor probe ideal for vibration monitoring in thick housings or deep countersunk holes of rotating machinery?
A: Because option 22 indicates it uses a 3/8-24 UNF imperial thread, the probe body has a wrench step for easy tool application, and it has an extra-long housing.

Q: When selecting the 330103-00-22-50-12-00, what mechanical accessories does the first option 00 represent?
A: Option 00 indicates that the probe does not include any interlocking hardware package for threadless parts at the factory.

Q: For the 330103-00-22-50-12-00 probe used in industrial fields, what is the included cable length corresponding to option 12?
A: The included cable length is a relatively long 1.2 meters (approximately 3.9 feet), allowing engineers greater physical distance to extend the connector to the junction box.

Q: When installing the 3300 XL 8 mm probe (model 330103-00-22-50-12-00) on a compressor or turbine unit, how can I avoid measurement signal distortion by changing the installation distance?
A: The initial gap of the probe must be adjusted to the midpoint of its 2.0 mm standard linear measurement range (approximately -10 Vdc gap voltage from the preamplifier output) and locked.

Q: What material is used for the outer cable protection of the 330103-00-22-50-12-00 probe with option 00 at the end?
A: Option 00 indicates that this model is equipped with a standard coaxial cable without external stainless steel armored flexible conduit protection.

Disclaimer

Moore specializes in the supply of both new and surplus industrial components, backed by an ever-growing global sourcing network. Please note that any manufacturer names, trademarks, or brand logos featured on this site are the property of their respective owners and are used for identification purposes only. Their appearance does not indicate an official partnership, endorsement, or authorized distributorship. We operate as an independent provider of high-quality automation solutions.