Bently Nevada 330905-00-18-05-02-00 3300 XL NSv Proximity Transducer System

│Contact us│

Sales manager: Yuki

Email: sales6@askplc.com

WhatsApp: +8617359287459

│Basic Information │

The Bently Nevada 330905-00-18-05-02-00 is a non-contacting eddy current proximity probe specially optimized for tight spaces and small targets where standard 5 mm or 8 mm probes cannot be deployed due to side-view restrictions. Featuring a metric M10x1 fully threaded housing with a 180 mm length and an integrated 0.5-meter cable, this NSv probe generates a tightly focused electromagnetic field. This design allows it to accurately track the position and vibration of small-diameter shafts or targets without being distorted by adjacent metal cross-sections or tight counterbores. Operating as part of the 3300 XL NSv Transducer System, it delivers exceptional chemical and environmental resistance, feeding precise dynamic raw data to machinery protection monitors to prevent catastrophic failures in confined setups.

│Details│

Unthreaded Length(00): 0mm

Overall Case Length(18): 180mm

Total Length(05): 0.5 meter (20 in)

Connector and Cable-Type(02): Miniature coaxial ClickLoc connector, standard cable

Agency Approval(00): Not required

Maximum Tightening Torque (M10 Case): 33.9 N·m (300 in·lb)

Recommended Installation Torque: 11.3 N·m (100 in·lb)

Operating Temperature Range (Probe/Cable): -34 °C to +177 °C (-30 °F to +351 °F)

Cable Nominal Impedance: 75 Ω coaxial cable

│Applications│

➟ Centrifugal Air and Gas Compressors: Serves as the primary vibration tracking instrument inside tightly packed centrifugal compressor housings where small rotor shafts require compact sensor dimensions.

➟ Industrial Refrigeration Compressors: Monitors internal shaft stability on refrigeration cooling trains that operate in highly enclosed, cold, or chemically challenging refrigerant gas environments.

➟ Small Target and Micro-Shaft Radial Vibration: Measures real-time radial displacement and relative dynamic motion on thin rotating machine components and miniature shafts under 51 mm (2 inches) in diameter.

➟ Tachometer, Speed, and Keyphasor Phase Reference: Captures precise zero-speed, high-speed RPM, or timing phase reference markers off small notches, steps, or keyways milled into confined shaft profiles.

│What happens next?│

Step 1 Email confirmation

After checking out or requesting a quote, you will receive an email confirming that we have received your order. Your quote will be accepted or your web order will be placed.

Step 2 Dedicated customer service rep

One of our customer service reps will be in touch to verify your part(s) and confirm your shipping details.

There's also a principle running through everything amikon does that doesn't show up on a spec sheet: if a customer can't find their part anywhere else, the team will track it down. No dead ends. That's a promise, not a marketing line.

If your line is down or you're trying to source a part that everyone else has given up on, the story continues. So does the search.

│More items│

Email: sales6@askplc.com

Whatsapp: +86 17359287459